Signage

cca-signs can make any kind of sign to fit your needs. See some examples below. There are various materials that can be used for the job including Foamalux foam, Perspex, Dibond, composite and more. We tend to recommend Dibond for any exterior signage as it is the most hardwearing. It is an aluminium / Perspex composite. Flat cut lettering can be cut from Perspex or Dibond to give a modern and stylish finish. Foamalux is a good choice for interior signage and comes in various thicknesses.

Depending on the graphics, flat cut vinyl may be used. This is 75 microns and is a gloss PVC film. It has a 7 year outdoor life and comes in a large range of colours and finishes, including metallic, gloss and matt.

If printed graphics are your best option, we print on to a 70 micron gloss or matt vinyl. We then use 60 micron overlaminate to protect the printed image from scratches or UV exposure.
We can install the finished signage for you. There is a wide choice of fixings available, from the simple screw, to super strong double sided tape that minimises on any drilling or holes in the finished signage. We also can fit with some very stylish fixings that raise the signage off the wall. These are stainless steel fixings and come in a variety of sizes and finishes including chrome, satin chrome, gold and aluminium. We can source most materials if you have a particular signage requirement.

Leave a Reply